{"product_id":"prestige-xl3-dtf-printer","title":"Prestige XL3 DTF Printer — 24\" Triple Epson i3200 9-Color Direct to Film Printer Bundle","description":"\u003ch2\u003eThree Heads. Nine Colors. Built to Order.\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003ePrestige XL3\u003c\/strong\u003e runs \u003cstrong\u003ethree Epson i3200 printheads\u003c\/strong\u003e across a 24\" web with the full extended inkset — CMYK plus \u003cstrong\u003eOrange, Green, Light Cyan and Light Magenta\u003c\/strong\u003e plus white. It's the machine for shops that have outgrown compromise on color and want the head capacity to sustain it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAn honest note on the third head:\u003c\/strong\u003e the XL3 prints at 60–80 sq ft\/hour, which is slower than the two-head XL2's 80–100. That's not a defect. The third head exists to carry the extended color channels and heavier white capacity, not to double throughput. If you want raw speed, the XL2 is the faster machine. If you want the widest gamut with the ink capacity to run it hard all day, that's the XL3.\u003c\/p\u003e\n\u003ch3\u003eWhy the XL3\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Epson i3200 printheads\u003c\/strong\u003e — more channel capacity than the XL2 Pro, same 9-color inkset.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCMYK + OGLcLm + White\u003c\/strong\u003e — extended gamut with dedicated head capacity behind it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1L bulk ink cartridges\u003c\/strong\u003e — essential across nine channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto-wet capping\u003c\/strong\u003e — heads park in cleaning solution while idle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Ink Management System (WIMS)\u003c\/strong\u003e — timed white stirring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive + active auto-cleaning\u003c\/strong\u003e — 4-hour idle maintenance, scheduled in-run cleans.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced sensors\u003c\/strong\u003e — head strike, auto ink alert, automatic film detection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment station\u003c\/strong\u003e — Printflo barcode automation and other add-ons.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAdjustable belt speed, powder shaking power, cooling and suction.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrintheads\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3× Epson i3200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInkset\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9-color: CMYK + OGLcLm + White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMainboard\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHoson\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInterface\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTCP \/ Ethernet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRIP Software\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eneoStampa RIP (Windows only) + DTF Station Pilot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Film Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24\" (61 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax Print Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e23.62\" (60 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrint Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e60–80 sq ft\/hour (30–40% Eclosion setting in Hoson)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDaily Output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350–500 pcs (12\" × 14\" design, 8 hr day)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInk System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 liter bulk cartridges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1000W, 110V, 9A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMachine Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e445 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShipping Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e580 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e74.21\"W × 29.5\"D × 65.11\"H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCrate Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e82.68\" × 38\" × 28\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eLead Time — Plan For It\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eXL3 units are made to order with an estimated 5–8 week lead time.\u003c\/strong\u003e This is not a stocked machine. Lead times are set by DTF Station and subject to change; we'll confirm current timing at the time of order.\u003c\/p\u003e\n\u003ch3\u003eXL2 Pro or XL3?\u003c\/h3\u003e\n\u003cp\u003eBoth are 24\", both run the 9-color inkset, both post the same 60–80 sq ft\/hr and 350–500 pcs\/day figures, and both share a chassis. The difference is head count and head type: the XL2 Pro pairs an i3200HD with an i1600; the XL3 runs three full i3200s. The XL3 gives you more headroom for sustained heavy-coverage work and spreads wear across more heads. The XL2 Pro is the lower entry point with fewer heads to maintain — and it's available without a 5–8 week wait.\u003c\/p\u003e\n\u003ch3\u003eChoosing Your Configuration\u003c\/h3\u003e\n\u003cp\u003eEvery XL3 configuration includes the printer, \u003cstrong\u003eon-site training\u003c\/strong\u003e (required for warranty), neoStampa RIP, DTF Station Pilot, and the Eddy2 ink shaker.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplies\u003c\/strong\u003e — 2× 24\" film rolls, CMYK+RGBO ink 1kg each, White 2× 1kg, white powder 3× 1kg, cleaning solution, isopropyl alcohol, 7\" swabs, lintless wipes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMiro 24 Shaker\u003c\/strong\u003e — 24\" inline powder shaker and dryer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeismo L24R Shaker + L2 Fume Extractor\u003c\/strong\u003e — heavier-duty shaker with fume extraction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArc 127 Cutter + neoStampa Add-On\u003c\/strong\u003e — contour cutting for cut transfers and gang sheets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrestige XL3 DTF Printer\u003c\/li\u003e\n\u003cli\u003eOn-site installation and operator training\u003c\/li\u003e\n\u003cli\u003eneoStampa RIP Software (Windows only) + DTF Station Pilot\u003c\/li\u003e\n\u003cli\u003eEddy2 Ink Shaker\u003c\/li\u003e\n\u003cli\u003eStarter supply bundle (see configuration above)\u003c\/li\u003e\n\u003cli\u003eConditional 6-month warranty on up to 2 printheads; limited 1-year warranty on non-consumable parts\u003c\/li\u003e\n\u003cli\u003eParts \u0026amp; accessories: USB with resources, ink reservoir, Y-connectors, straight connectors, ink filters, 1m ink tube, dampers, assorted screws, magnets, panel key, waterproof tape, 30ml syringes, printhead cables, power cord\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eColor Gamut Consulting Support\u003c\/h3\u003e\n\u003cp\u003eNine channels across three heads is the most demanding profiling job in DTF, and the most rewarding. Getting Orange, Red, Green and Blue to engage correctly — rather than sitting unused while CMYK does all the work — requires custom separation built for this specific machine, ink and film combination.\u003c\/p\u003e\n\u003cp\u003eWe build those profiles. On a printer at this price with a 5–8 week lead time, arriving with the color pipeline already designed means you're producing sellable work the week it lands instead of two months later.\u003c\/p\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade to order:\u003c\/strong\u003e 5–8 week estimated lead time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn-site training is required\u003c\/strong\u003e for warranty coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e use of non-DTF Station ink, film, powder, or supplies will void coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFreight:\u003c\/strong\u003e 580 lb crated. Confirm dock or liftgate access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 1000W, 110V, 9A dedicated circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoftware:\u003c\/strong\u003e neoStampa RIP is Windows only.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DTF Station","offers":[{"title":"Eddy2 + Software + On-Site Training","offer_id":46614667329733,"sku":"BNDL-PRESTIGE-XL3-NS","price":22265.25,"currency_code":"USD","in_stock":true},{"title":"Eddy2 + Supplies + Software + On-Site Training","offer_id":46614667362501,"sku":"BNDL-PRESTIGE-XL3-QG","price":23655.59,"currency_code":"USD","in_stock":true},{"title":"Miro 24 Shaker + Eddy2 + Supplies + Software + On-Site Training","offer_id":46614667395269,"sku":"BNDL-PRXL3-MIRO24-QG","price":28151.09,"currency_code":"USD","in_stock":true},{"title":"Seismo L24R Shaker + Eddy2 + Fume Extractor + Supplies + Software + On-Site Training","offer_id":46614667428037,"sku":"BNDL-PRXL3-L24R-PL2-QG","price":31734.63,"currency_code":"USD","in_stock":true},{"title":"Arc 127 Cutter + Miro 24 Shaker + Eddy2 + Supplies + Software + neoStampa Add-On + On-Site Training","offer_id":46614667460805,"sku":"BNDL-PRXL3-MIRO24-A127-QG","price":40607.09,"currency_code":"USD","in_stock":true},{"title":"Arc 127 Cutter + Seismo L24R Shaker + Eddy2 + Fume Extractor + Supplies + Software + neoStampa Add-On + On-Site Training","offer_id":46614667493573,"sku":"BNDL-PRXL3-L24R-PL2-A127-QG","price":44190.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0740\/9306\/8485\/files\/Prestige_XL3_Seismo_L24R_Purifier_L2.jpg?v=1791586991","url":"https:\/\/www.colorgamutconsulting.com\/products\/prestige-xl3-dtf-printer","provider":"Color Gamut Consulting","version":"1.0","type":"link"}