- SKU: AA-PURIFIER-L2
- VENDOR: DTF Station
DTF Fume Extractors — L2 and L4 Air Purification for Curing Stations
You're Breathing the Cure Cycle.
Curing hot-melt adhesive releases fumes and fine particulate. Powder shaking puts polyurethane dust into the air. In a small shop with the door closed, that accumulates — and the people breathing it are you and your staff, eight hours a day.
This is the piece of equipment nobody budgets for and everybody should. A fume extractor pulls contaminated air at the source, filters it, and returns it clean.
Two Sizes
| Model | For |
|---|---|
| L2 Fume Extractor | Single-station setups — a desktop printer with an oven, or up to L24R Shaker |
| L4 Fume Extractor | Higher capacity for larger shakers, wider machines, or a station running continuously like the V36 |
Filters Are the Whole Product
An extractor with saturated filters moves air and removes nothing. Filters are consumable and they have a real service life. We stock:
- Replacement filter for Purifier MINI and L2 Fume Extractor
- HEPA replacement filter for Seismo A16 and A24
- Three-layer replacement sets for the Aries 213/124 purification system — dust, carbon and cold catalyst layers
Set a replacement schedule based on run hours, not on when performance is visibly bad — by then you've been breathing unfiltered air for a while. Ask us to work out a cadence for your usage.
A Straight Recommendation
If you're buying a powder shaker and trying to decide whether to add extraction, add it. It's a small fraction of the shaker's price, and respiratory exposure is not a problem you can retroactively fix. The Seismo L24R and V36R bundles include an L2 for exactly this reason.
Important Notes
- Not a substitute for room ventilation in a fully enclosed space.
- Filters are consumable — budget for replacements.
- Full specifications — airflow rate, filtration stages, power draw, noise level — are being confirmed with DTF Station and will be added shortly.
